We recommend the TG112 sight set for the Winchester 94. These are intended for use on Model 94’s with a factory front sight base ramp. Many of the “carbine” models have their front sight dovetailed directly into the barrel (no base ramp). It is important that you measure the factory front sight dovetail insert for compatibility with our sight set (TG112).
We supply a front sight insert that is .450”, measured from the bottom of the dovetail to the top of the sight. If your front sight insert is shorter than .450”, or significantly taller, then we would not recommend to install these sights on your Winchester ‘94. These sights can be drifted in and out with a small hammer and a soft-metal punch or drift.
We always recommend to have an experienced gunsmith perform replacement sight installations of any kind.